I have had numerous contacts about glaze, so I thought it might be nice to pass the information on to all of you. The crazy thing that I have noticed about buying glaze is that the people at Lowes and Home Depot can sometimes cause confusion when it comes to this product. I’m sorry about that, and I’m sorry if you have been frustrated in your search to find the right product.
Here are my top 10 tips for glaze:
1. Do NOT buy a gallon. I glaze furniture a LOT and believe me, you do not need a gallon. In fact, I don’t even need a gallon. I have used about 1/4 of a gallon combined between all my projects and countless friends who have borrowed my glaze.
2. The brands of glaze that I have seen people find are: Valspar (at Lowes) and Behr Antiquing glaze (at Home Depot). I have Ralph Lauren Faux glaze, but some report it impossible to find. (If you have found another brand that I have not listed, please let me know so that I can add it to the list).
3. Depending on the size of your project, I would suggest to buy the smallest container of glaze that you can. I know that Valspar has a size that costs around $7.00. For most projects, this would be plenty.
4. Yes, it needs to be tinted. Again, I wish I knew why Lowes and Home Depot employees are confused at this, but if you cannot buy it with a tint in it, you will need to tint it yourself. I simply add black paint to mine until it is as dark as I want it. If you want it brown, simply add brown paint instead of black.
5. Can you glaze something a light color? For example, if you paint something black, could you glaze it white? Honestly, I have never tried this. But in theory I guess you could. I’d love to see the finished product if anyone has done this.
6. You need to rinse out your cloth a lot during the glazing process. In fact, I even switch cloths for a fresh one quite often. If you notice that your glaze is not rubbing off and it is leaving a film on your furniture, then you need a new cloth.
7. How long do you leave the glaze on before wiping it off? For me, this is an instant thing. I like for the glaze to stay in the cracks and crevices of the piece, but be wiped pretty clean on the rest. So, I brush it on with a paint brush, and then wipe it off.
8. If your furniture does not have cracks and crevices for the glaze to go into, glazing may not be the best choice for your furniture refinishing project. A few of you have contacted me saying that the glaze has not made much of a difference on your project. This is because the technique of glazing works best when making details pop out of intricate furniture. If the furniture lacks that character to begin with, the glaze would simply make the paint look darker and a little weathered.
9. If your glaze goes on too dark for your liking, get a clean, wet cloth and wipe it off. Most of the glaze will wipe completely off, and you can start over with less glaze.
10. Could I use regular paint to create the same look? No. I have tried it, and so have countless readers. The paint does not rub off like the glaze does.
Here are a few pictures of projects I have glazed:
I have had the chance to read Altar’d’s newest ebook on decorative finishes. I would never recommend something that I have not read completely myself to my readers. This ebook is very well written and includes some GREAT tips on adding decorative finishes to furniture projects. Check it out by clicking the image below.
If you purchase the ebook, I will get a portion of the product sale. I would not endorse something that I don’t think is great, but I wanted to keep it real. I get a lot of e-mails about how to paint furniture, and this book is written by professionals who paint furniture everyday.
THanks so much!
Great post! I have a technique on my blog on how to glaze a flat surface….
http://vintagerevivals.blogspot.com/2010/11/awesome-fied-desk-and-mirrors.html but I totally agree that the more intricate the better!!
Love your guts lady!
mandi
It would be helpful when you give a link to your site referencing a post “how to glaze a flat surface” that the post would be available.
yes! when i asked for some at my HD they looked at me like i had a third head! I ended up with varnish. it worked ok
I have actually glazed with a light color. I did a sage green desk and glazed it with an off white glaze. It gave it a depth that wasn't there before. Made it look like it had been out in the sun.
I also did black candlesticks and a black frame that was too harsh in my country cottage cream living room. It knocked down the color a lot and made the details really pop. I had picks but can't find them!
Great site! I posted about the fabulous yellow side tables on my blog recently…http://carolinesimas.blogspot.com/2010/11/love-of-yellow.html
Caroline
http://www.multipleblessings.net
great post! thanks so much for all this info.
gail
Thanks for the tips….Ralph Lauren paint was distributed by Gliddon (sold at HD) but they no longer do so as Martha replaced Ralph….they do still carry some of the Ralph products but not what they used too!
P.S. I love all the furniture you've done they look awesome.
Okay so I used the Lowes antiquing glaze, but I didn't get it as black as I wanted, so I need to add black paint to it? Is that what your post means? I never even thought to use a paint brush, good tip on that, I will have to go back and do it again. lol
Here's what I faux finished
http://theobstinantfamily.blogspot.com/2010/11/refinished-dresser-droors.html
These are adorable!!!! LOVE the different colored chairs!
Thank you so much! Glaze confuses the heck out of me. I've bought so much of it but never know what to do w/ it. And you are right, the HD and Lowe's guys don't either.
Brooke! My hubs and I glazed with white-tinted glaze!! Check it out here! http://www.sawdustandembryos.com/2010/11/best-lunch-break.html
I have had some success with dry bushing when I'm out of glaze. Recently I did some small frames and it looks comparable to some of your stuff. But the color goes on in reverse. I painted everything a dark blue then dry brushed a turquoise on top. The dark blue is in the recesses. Anyway, it's a bit different (and takes longer and is harder) than glazing but gave some nice dimension.
I bought my ralph lauren glaze at the beginning of the summer. The guy at home depot told me that that they were discontinuing it so he didn't have the exact glaze colors or what tint to put in so he just did the best he could. I guess I found it just in time!
The Obstinant Family,
Yes, if it isn't as black as you wanted, add black latex paint into the glaze to make it darker.
I use white glaze all the time and write about it regularly to encourage people to give it a try. Not on black of course, but on colors where you want to keep a nice soft look. I buy the Valspar Clear Mixing Glaze and just add a bit of whatever color paint I want to create the perfect glaze! Be brave – glaze on!
I have some larger old brass pieces that I want to paint (for outside porch). I really want to do them black with some gold antiquing on them. Any advice on what produce to use for the gold? I have lots of Valspar Clear glaze. Should I just try to find some gold latex paint to mix with it? Needs to stand up to outside elements.
Use gold craft paint. It works great! Just add it to the clear glaze. Good luck!
These are fabulous projects! And I'm loving the table and chairs SO much!
What kind of paint do you add to tint the glaze? Could you add craft paint? Thanks for all the great tips!!!
I've used the Valspar brand on most all of my projects and love it. I've even helped the workers at HD know what to do with the RL glaze. They didn't know what colors to tint it with at all- funny that it's such a mystery product. 🙂
I was also going to add that there's a glazing medium you can get at Michael's in the oil painting section. I use that and then mix it with acrylic paints and it works great. (I've done pink and red glaze that way.)
Thanks for the good early-morning reads! My girls are quite the rotten sleepers the last few weeks. 🙂
I appreciate the tutorial on glaze. Like others, I've tried just using watered down paint and ended up having to redo everything. Eventually I got it to work but just going with a real glaze would have been easier.
I'm currently giving away an professionally painted Santa portrait on my site. I'd love you to join.
April from HomeHinges.com
Thanks! A guy at Home Depot freaked me out. He made it sound all complicated like I needed to go to the paint store and have them mix glaze for me. So, I didn't try it, thinking it was too advanced for me.
Regina,
Normally I use regular latex paint from the gallon (because I have a lot on hand), but I have used craft paint before. 🙂
Hi Brooke! I have to say first that I love your site and style. I have finished many projects over the past 6 months thanks in part to inspiration I got here. I was also wondering if you could glaze with a lighter color, so I did actually try it. My mom wanted a black TV stand but still wanted the details to pop like glazing does. I painted it black then glazed it in a peanut butter brown color and I think it looks awesome! I still need to take some "after" pics and I will send them to you when I get them.
One more question, Brooke: How do you get the glaze to stay on the EDGES of your furniture? Like the table and chairs? So you sand first before you glaze? I just finished a table (I copied yours :)) and I couldn't quite get the same look as yours. What do I need to do? Thanks!
~ Allison
I mean, DO you sand first….
🙂
So I did some end tables the antique white (Krylon) and then did a brown glaze (Behr) over them. Green starting popping up on some sections. Like a LIME green. Any thoughts? Some parts are just fine others not so much.
THANK YOU!!! I desperately NEEDED THIS!
Is there glaze available in a spray paint can? I'm a bit confused. I'm planning on spray painting a dresser. then giving it the distress look afterward with steel wool. I guess this is two separate ways of refurnishing old furniture.
I have the Valspar brand so if I add brown paint to it will it turn brown since it is so black?
I glazed my entire kitchen using the Valspar and I love… how it turned out.
LOVE the table with the different colored chairs. I may have to steal that idea someday for my own dining table and chairs. 🙂
Totally right about lowes. The guy sent me to the stains. I ended up goin back to cabinets and asking a girl back there to help me find a glaze for cabinets she took me right to the valspar glaze. I'm excited to see how my cabinets turn out :0)
On the blue chair, you said you did a couple of coats to get a deeper color on the glaze. I was wondering how much time you need to allow for drying in between coats?
So I have an ugly old dresser that I want to refinish. Do I sand it first or leave all the dings and stuff. Then can I paint it a different color and then glaze. You're right about the home depot. They looked at me like I was nuts. 🙂
I am following your FAQ on glazing my first piece of furniture. I went to Lowe's today for the Valspar antique glaze and they only had it already tinted with an asphalt color. (grayish) When I talked to the paint guy, he said that was the only tint available. Question – do I still tint it black – which is what I was wanting – or is there a clear glaze available online to tint with black latex paint. Sorry for the confused newbie question!
Thanks
Thank you for your tips. I went to Home Depot last night and they SWORE they did not have the product I needed. Also, Lowes said the same thing. I wanted to pull my hair out but you have helped a lot! I love your projects!
@RD Shugart
Ugh. So frustrating! I would at least have them tint it black for you and I have never ordered glaze online but I know the above brands all work well. I'm sorry you couldn't find what you wanted… Hope this helps!
I very recently glazed a piece lighter for my sister. It was a side table, painted black, then we did what I call a "dirty glaze" over the whole thing. Lightened up the piece a bit, plus it left a pretty shimmer over the whole thing. Not to mention the silver in the details. Came out gorgeous!
love your furniture! I have been wanting to glaze something for awhile, but I wasn't brave enough. Your detailed instructions gave me the courage to try it out and I can't believe the difference it makes! Yay. So happy!
Do you know how long glaze lasts? I have some that is probably a few years old when I was doing this type of work more often. LOVE the look of your furniture and I'm so happy I stumbled upon your page here. FYI.. it was via a pintrest pin.
So did you answer any of these posts? I want to see the answers. 🙁 Okay, I googled glazing flat surfaces and your post won! But, nothing about flat surface. I want the look you have on that yellow piece at the end. I don't glaze, but have some. I want to do a dresser in yellow but dark over it and I'm nervous about the top and sides that are completely flat. You did flat surfaces on the dresser tops/end tables, what did you do? Thanks!
http://junkparlor.blogspot.com
@Brooke
You use the same exact technique for the top as you do the rest of the piece. You add and wipe until you achieve the look you are going for! Super easy!! Then, when you do get the look you want, just leave it to dry!
Take a look at this previous post The Pink Desk
Good luck!
Does it matter what type of paint you glaze OVER? I am on a chalk paint kick right now, but not sure if you can glaze over the chalk paint.. or the wax? I don’t want to buy dark wax so i want to black glaze. Please answer this. I can’t find this info anywhere online
Brandi that is an excellent question and I wish I had an answer for you! But I have never glazed over chalk paint. If you try it, please report back!! I want to know the answer too.
You can glaze over chalk paint. I have done several projects including my kitchen cabinets and they were amazing.
You sure can glaze over chalk paint, it does soak in more. I just work in smaller sections. I just did my kitchen cabinets in paris grey and did a black glaze and i love them.
Use matte polycryllic over the chalk paint first. It keeps the glaze from soaking in. And polycryllic eliminates the need for wax.
Can you glaze over a latex enamel paint? It’s left over from my kitchen accent wall and I am wanting to paint and glaze a door and hang it to look like a barn door in my basement. Will the glaze work over that kind of paint?
Yep it sure will! As long as the sheen is satin or semi-gloss it will. If it is eggshell or flat, the glaze will soak into the paint instead of wipe off. I hope that makes sense. Good luck!!
Brooke,
Thanks for all the info! I couldn’t get any info at the local big-box store concerning my project. My husband has a cherry entertainment center that I want to repurpose for storage in our home office. It is a beautiful piece that I didn’t want to wind up on Craig’s List! I have used black enamel paint to distress an old gateleg table that will be used as a writing table in the room. Can I use a tinted black glaze directly on the cherry furniture to tone down the red in the entertainment center? No one has been able to answer this question. Help, please! Thank you
Yes! You betcha you can. I’ve seen it done many times on furniture just to tweak the color just a bit. I’ve never seen it on cherry furniture before, but I’m sure it would work great. Try it on a spot that won’t be seen much as a small test area and report back! Good luck!
THANK YOU! you, so much I found it just in time.
I’ve been following your blog for a while now. And I want you to know that you’ve have inspired me to try so many things. So much in fact, that I’ve got them lined up waiting for me.
I’m about to start glazing my first piece and I was concerned
about the glaze I
Maybe I missed this, but do you use something like a Polycrylic after you glaze?
Yes, I use polycrylic to seal the furniture after.
You said you use a polycrylic to seal glazed furniture. When I used it (minwax) over Valspar clear mixing glazed mixed with burnt umber ) over a oak wood bedroom set. I got blotches. Maybe I did not let it cure long enough before I put the poly on. How long do you wait before applying the polycrylic?
Wait until it is completely dry. Overnight is best.
Thanks so much for a great tutorial. I just bought the glazing medium from Michaels today and want to glaze a shelf I painted but needs just a little more antiquing. My question is..you said to glaze semi gloss or eggshell but I painted in a flat finish. Can I use a light coat of polyacrylic to seal it and then put the glaze over that so it doesn’t sink in as much. then add another coat of poly on top of that? Thanks so much for the advice.
Debbi! Yep! That’s a great plan! Good luck!
Hi! Thanks for your tips! I’m currently using a DIY recipe for chalk paint and painting my kitchen cabinets. They look great! I’m using the Valspar antiquing glaze and finishing it with wax. One of my children has gotten something on one of the cabinets and, when I scrubbed it off today, it must’ve rubbed the wax and antiquing glaze off. Now it’s a much lighter section where I cleaned. Do you know why it would do that and how do I correct/prevent it from happening again?
Brownie, Finishing wax does not protect your cabinets long term. It isn’t very durable and needs to be redone at least every year or two. You saw first hand what I’m talking about. You can’t scrub it hard or it just doesn’t hold up. I wish I had better news for you. But, I don’t use wax for this very reason.
I am confused as to why you would color the dark antique glaze from Lowe’s? I noticed this in one of your first posts? Also another question I had was can you use antique glaze over chalk paint? I found the answer on your page! Thanks! I will try it this weekend! 🙂
I just like the glaze to be darker. That’s the only reason.
Hi, I have been looking all over the internet but got no answer, plz help me with this:
If I have spray painted the chair, should I use an oil based glaze or water based?
Should I add an acrylic, latex or some other oil based tint to the oil/water based glazed?
Also is tinted glaze available? or one always has to mix a tint to the glaze?
Would really appreciate a response.
Thanks
Water based glaze. Add Latex. Yes tinted glaze is available, but I add more paint to make it darker.
Hi there, A lot of great information on your page. I have a question for you. I have just painted and used the Valspar antiquing glaze on a desk. What specific products would you recommend to seal it? I saw an earlier post that said something about a polycrylic? THis does happent to e my first piece, so I am not familiar and the people at Lowes were looking like they had no idea what to use. The desk turned about really beautiful, so I want to preserve the finish it has.
Nannette
Yes polycrylic would be my first choice. Good luck!
Do you use a top coat/clear coat protective finish on your glazed projects? Thanks for the 411, very helpful, so sad RL can’t even be found with Amazon Prime 🙁
Yes, using a topcoat product helps preserve the glazing for sure.
I just found your site, GREAT. My kitchen & living room blend together. I have redone the living room from country blue to 5 shades of gray & black. Now to the task of redoing the cabinets from country blue to blue base with a gray cast, where it kinda looks blue or is it gray, they are painted semi gloss, can I mix a clear glaze with my darker gray satin paint? Do I need to light sand the cabinets before the glaze? HELP please. Thank you
Yes this would totally work. No sanding needed. Good luck!
Does this only work on real wood?
Nope. It works on all surfaces.
Thank you for all your information. I’m getting ready to paint and “antique” our bathroom vanity. So I have been checking out all the do’s and don’ts for just the right techniques. I went today to get a quart of glaze and have them tea stain it for me. The girl looked at me like I was a little off in the noggin. She said “Oh we can’t add color to the glaze. We have these little jars of paint you can buy and you’ll have to do it yourself.” I told her that they use to do it for the customer. She said no we never have. I told her ugh ya. Cause I have it on my bedroom wall right now. And all I had to ask them to do then was to tea stain to it for me. She again looked at me like I was off plumb and said they told them they can’t. So I didn’t get it cause I wasn’t sure how much brown to use to make the glaze the right color. So now I doing my research on that one. Thanks again for all the information.
I love the blue server, can you please tell me what color you used and what manufacturer of paint along with the type of glaze you used..its absolutely beautiful!
It’s called Ocean Breeze by Krylon and the glaze is Ralph Lauren antiquing glaze tinted black.
Thank you for the great tips! I have not tried my hand at Glazing yet, but can’t wait to give it a try.
What type of paint do you tint the glaze with ie; flat, satin, semi gloss or gloss? Newbee…thanks
I prefer something with a little bit of a sheen. So satin would be my first choice. I’ve don’t glazing with all of these and it works fine.
I am about to paint a cabinet a darker blue, but am going to glaze it with a lighter color, most likely a taupe. I will send you some pictures if you would like to see a lighter glaze on a darker paint. Thanks for your post, it has helped me in the process!!
Can’t wait to see it! Don’t forget to send pictures!
Which of the glazes would you consider the easiest to apply or do you have a favorite glaze that you use the most out of the three you mentioned?
Hello! I’ve never glazed, but want to glaze a purple piece with turquoise tinted glaze that I’ll make. Any tips? I’ll practice on something small that I don’t mind messing up, first.
My advice? Just do it. 🙂 It’s easier than you think! Good luck!
Hi, what do you suggest I use for a round table top that is about 1 1/2 in plywood with a vinyl covering. I’ve tried several things now and not satisfied yet with the outcome. I’ve done Kilzwhite paint and a dark walnut polyshade and I like the color and tint but it’s hard to get a nice finish. The base of the table is turquoise as are my chairs. Thanks.
Are you staining the top or painting it? 🙂
I just put glaze on my kitchen cabinets and some of the paint came off. Is this something I can fix or do I need to start from scratch? :/
Hi Brook, what kind of paint are on the cabinets?
Hi there! I am new to antiquing and instead of starting off with a small project, I dove in head first with refinishing my Kitchen cabinets. Finally got my technique down and I am loving the look of it…….that is until I put a top coat of polyurethane on for protection. I am so disappointed in the way it has added more of a glossy finish than I wanted, as well as turning a yellowish color. Luckily I am only 1/2 way through the top coat stage! I see from your revised post on ‘Painting 101’ that using a polyacrylic is the way to go, any suggestions on taking off the already set polyurethane? Will I need to strip it and start over completely? I understand there probably ins’t an easy fix, but if I could find something easier than what I am ‘assuming’ will need to be done….I’m all ears! Great blog, thanks!
Yes, I’m so sorry! But, stripping it off and starting over is the best way I can think of. DARN IT!
Sherwin Williams has Acrylic paint just for kitchen cabinets. It will go right over the oil based or shilac and holds up well. I took one of my cabinet doors that had been painted 10 years ago with oil based that had yellowed and they matched the paint exactly to match the white/yellowed color so I could touch up the cabinets. Amazing results.
My cabinets were just painted a chocolate brown (wanted darker, but there was a mixup). If I used a black glaze, would that make them look darker or just antiqued? What I’m really going for is something along the lines of a Kona stain, although, I know I won’t get that exactly with painted wood. Thanks.
Yes this would totally make them look darker.
My son is making me a farm house table with old barn wood top, but for the legs and chairs I would like a farm house look with red. What color would look good if I want to antique it .
Chris
I’ve seen brown glaze and black glaze used to antique red and both looked great. The black was more noticeable than the brown. 🙂
Do you need to seal the glaze after it has dried or does it act as a sealant? Thanks for the questions/answers! Very helpful! 🙂
I would put a sealant over it if it’s a high traffic piece like a kitchen table or a night stand. 🙂
I am going to remove the old SHELLAC from an old trunk and since I couldn´t find a combination Varnish and stain of the color I ike, I bought Valspar Water based furniture paint to put on it – it´´s a fairly bright red and I wanted a deeper red, so can I put a glaze on it and then a protective coat of polyurethane (water based )finish to protect it?
Thank you.
I buy my glaze from Benjamin Moore. Instead of a wet cloth I use baby wipes to remove the glaze. So easy with those. As well, I have glazed with white. Just finished a coral mirror that I glazed with white, did some drybrusing with white then used gold rub n buff on certain raised parts.
I have just used valspar antiquing glaze for the first time over the valspar chalky finish paint. I have never used either product before. So far, I have put two coats of chalky finish paint on my peice And a coat of antiquing glaze. I think they look pretty good but my question is…do I need to put a wax or some sort of “top coat” on top of the glaze??
Over chalky paint, I love the Rust-Oleum Clear Matte Top Coat Product. 🙂 Good Job!
I want to put Ralph Lauren Metallic glaze over my Ann Sloan chalk paint…do I need to wax my piece first before I add the Metallic glaze….this glaze is acrylic based and not water based..does that make a difference….will I still be able to wipe down the glaze if it’s acrylic based….after I use the Ralph Lauren Metallic glaze over the piece should I wax it again after the glaze…thanks
It doesn’t make a difference if it’s water or acrylic based. The thing that matters is that annie sloan paint is flat. If you don’t wax or seal it first, the glaze will soak right into ALL the paint, not just the nooks and crannies, and it won’t wipe off. So you need to seal it with polycrylic first to be able to glaze effectively.
I have used paint to antique and it worked great. I touched the tip of the paintbrush in the paint then dabbed on a section at a time then barely wet the brush with water and spread lightly over the dabbed on paint to wet it some then very quickly wiped away most of the dark paint leaving streaks that look like wood streaks. I do a section at a time and it goes on quickly. After it drys over night I then apply a wax coat ( Johnsons wax for floors) or a top coat of water based polycrylic. I’ve done 6 pieces this way and they look wonderful. I would love to send pictures for you to see.
I put tinted wax on an old sewing machine cabinet but it didn’t turn out like I was expecting. I would like to see more gray in the cracks so can I go over the wax with a gray glaze?
Yes, but make sure that you aren’t glazing over flat-chalk paint or the glaze will literally tint the entire piece.
Just finishing up my first project. I wish I’d known about your blog before I started. I bought way to much glaze, even thought I bought only 32 ounces. Mine also ended up darker than I expected as I used a ratio of 1 parts latex paint and 3 parts glazing medium. I would have also wiped more off with a damp cloth rather than a dry cloth and changed cloths more often. I still happy with the results even though it is darker than I expected. I’ll probably do some more projects and I have the extra glaze to do it. 🙂
Thanks for all the useful information!
By the way, you may want to add ArtMind Glazing Medium to your list, I found it at Michaels. Usually it’s $10 for the 8 oz size and $19 for the 32 oz. size, but with a 40% of coupon for one item (I get them all the time) It was really arfordable.
http://www.michaels.com/diy-home-glazing-medium-artminds/M10401945.html?dwvar_M10401945_color=Clear#q=glaze&start=16
Awesome! Thanks for the info!
Hi,i just painted mt kitchen cabinets white satin enamel paint ,can i now put a glaze on them to make the look old,or do i have to degloss them first,love your site ,a lot of good information,thank you so much for all your help!!
It depends how much glaze you want to show. If you want it to just stick in the nooks and crannies, you can glaze it now without doing anything to it first. The only concern I have for is that it will eventually wipe off if you don’t somehow seal over the top of the glaze. But, I personally would just glaze them now and then reglaze in a few years if too much has wiped off.
Nice job! Rustoleum also makes a glaze in two different shades. Brown and gray. I find this at Menards or Amazon. I haven’t tried any other brands yet so I can not compare but I like it.